Mojave Audio MA-301fetVG

$999.00

Multi-pattern Large Diaphragm Solid State Condenser – VINTAGE GRAY

Description

MA-301fet Condenser Microphone

The MA-301fet is a multi-pattern large diaphragm, solid-state condenser microphone. Based upon the popular MA-201fet designed by David Royer, the MA-301fet adds a 3-posistion pickup pattern selector, a15dB pad and a switchable bass roll-off. Utilizing a 3-micron gold-sputtered capsule, high-quality Jensen audio transformer, military-grade FET and custom designed low-noise resis-tors, the MA-301fet performs at a level reminiscent of some of the best loved classic condenser microphones. Each MA-301fet microphone iscarefully tested and evaluated, then packaged in its protective casewith a professional grade shock mount.

Features:

• Multi-pattern: Cardioid, Omnidirectional, Figure-eight (Bi-directional)

• Switchable 15dB pad

• Switchable Bass Roll-off

• Hand-selected 3-micron 1” capsule

• Jensen audio transformer• Military-grade FET

• Custom designed low-noise resistors

• Ultra clean signal path.

Recommended Applications:

• Vocals

• Voice Over and Broadcast

• High SPL sources, such as Kick Drums and Bass Guitar Amps

• Electric Guitar

• Piano

• Drum Overheads, Drum Rooms

• Acoustic Instruments

 

Technical Data:

TRANSDUCER TYPE: Externally polarized, pressure gradient capacitor – double diaphragm.

DIAPHRAGM: 1-inch diameter, gold sputtered

DIAPHRAGM THICKNESS: 3 microns

POLAR PATTERN: 3 patterns; omni, cardioid and figure-8

FREQUENCY RESPONSE:20 Hz to 20 KHZ, ±3 dB at “flat” setting of bass cut switch. Bass cut switch provides 6 dB per octave attenuation below 100 Hertz in “cut” setting

SENSITIVITY: -40.5 dB, re. 1V/pa

MAXIMUM SPL: 120 dB with pad off, 135 dB with pad on.

DISTORTION: < 1% @ 120 dB SPL , < 3% @ 134 dB SPL with pad off < 1% @ 134 dB SPL, < 3% @ 148 dB SPL with pad on

SELF NOISE: 14dB nominal, not to exceed 16dB (A weighted)PAD: 15

dBBASS CUT: 6 dB per octave below 100 hertz.

IMPEDANCE: 550 ohms, transformer balanced (Jensen)

POWERING: 48VDC phantom power; current 1.2 mA