Mojave Audio MA-301fet

$999.00

a multi-pattern large diaphragm, solid-state condenser microphone

Call For Availability

Description

The MA-301fet is a multi-pattern large diaphragm, solid-state condenser microphone. Based upon the popular MA-201fet designed by David Royer. This microphone adds a 3-position pickup pattern selector, a 15dB pad and a switchable bass roll-off.  With military-grade FET and custom designed low-noise resistors, the MA-301fet performs at a level reminiscent of some of the best loved classic condenser microphones.

Features

  • Multi-pattern: Cardioid, Omnidiectional, Figure-eight (Bi-directional)
  • Switchable 15dB pad
  • Switchable Bass Roll-off
  • Hand-selected 3-micron 1″ capsule
  • Jensen audio transformer
  • Military-grade FET
  • Custom designed low-noise resistors
  • Ultra clean signal path

Recommended Applications

  • Vocals
  • Voice Over and Broadcast
  • High SPL sources, such as Kick Drums and Bass Guitar Amps
  • Electric Guitar
  • Piano
  • Drum Overheads, Drum Rooms

Technical Specifications

  • TRANSDUCER TYPE: Externally polarized, pressure gradient capacitor – double diaphragm.
  • DIAPHRAGM: 1-inch diameter, gold sputtered
  • DIAPHRAGM THICKNESS: 3 microns
  • POLAR PATTERN: 3 patterns; omni, cardioid and figure-8
  • FREQUENCY RESPONSE: 20 Hz to 20 KHZ, +/-3 dB at “flat” setting of bass cut
    switch. Bass cut switch provides 6 dB per octave attenuation below
    100 Hertz in “cut” setting
  • SENSITIVITY: -40.5 dB, re. 1V/pa
  • MAXIMUM SPL: 120 dB with pad off, 135 dB with pad on.
  • DISTORTION: < 1% @ 120 dB SPL , < 3% @ 134 dB SPL with pad off
    < 1% @ 134 dB SPL, < 3% @ 148 dB SPL with pad on
  • SELF NOISE: 14dB nominal, not to exceed 16dB (A weighted)
  • PAD: 15 dB
  • BASS CUT: 6 dB per octave below 100 hertz.
  • IMPEDANCE: 550 ohms, transformer balanced (Jensen)
  • POWERING: 48VDC phantom power; current 1.2 mA
  • DIMENSIONS AND WEIGHT:
    Carrying case with microphone, shock mount: 10″ x 9″ x 4.5″, 4 lbs.
    Microphone: 7 5/8″ X 2″ (194mm x 51mm), 1 lb. (0.45Kg)