Tascam ML-32D
    Tascam ML-32D
    Tascam ML-32D
    Back to Products

    Tascam ML-32D

    $2,999.99

    Out of stock

    SKU: ML-32D Categories: , Brand:

    Description

    Tascam ML-32D 32 channel AD/DA Dante Interface

     

    The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital?Audio?Network?Through?Ethernet) network using external breakout devices that utilize Sub-D format connectors.

    A poweful and flexible solution, the TASCAM ML-32D has 4 D-Sub intputs and 4 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.

    FEATURES:

    • Dante focused interface for connection of external audio into or out of a Dante audio network
    • 32 channel analog line input and 32 analog line outputs (48kHz/96kHz) using 8 D-Sub connectors
    • Dual redundant Ethernet jacks which support both primary and secondary connections
    • Up to 24 bit/96kHz quality
    • LED display for signal level and overload per input/output channel
    • Reference level dip switches for selectable DBu level metering
    • Firmware updatable via Dante port
    • AES67 and Revenna compatible

    • ML-32D SPECIFICATIONS

      Formats?

      44.1/48 kHz, 16/24 bit

      88.2/96 kHz, 16/24 bit

      Input/output ratings?

      PRIMARY/SECONDARY connectors?

      Connector: RJ-45

      Transmission protocol: Dante

      Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)

      Cables: category 5e or faster STP cables

      ANALOG OUTPUT connectors?

      Connector: D-sub 25-pin

      Locking screws: No. 4-40 UNC (inch type)

      Nominal output levels: 4 dBu, 6 dBu (only when maximum output level is 15 dBu)

      Maximum output levels: 24 dBu, 22 dBu, 20 dBu, 18 dBu, 15 dBu (set by REF. LEVEL?switches)

      Output impedance: 200 ? or lower

      Applicable load impedance: 2 k? or higher

      ANALOG INPUT connectors?

      Connector: D-sub 25-pin

      Locking screws: No. 4-40 UNC (inch type)

      Nominal input levels: 4 dBu, 6 dBu (only when maximum input level is 15 dBu)

      Maximum input levels: 24 dBu, 22 dBu, 20 dBu, 18 dBu, 15 dBu (set by REF. LEVEL switches)

      Input impedance: 10 k? or higher

      * 0 dBu=0.775 Vrms

    Additional information

    Weight 8 kg

    Related products