Description
The Model 362 Listen-Only Belt pack is a self-contained 2-channel user device that supports headphone monitoring of two audio channels associated with the Dante® audio-over-Ethernet media networking technology. It’s expected that most applications will use multiple Model 362 units to support the individual audio monitoring needs of a group of users.
Key Features
Dante audio-over-Ethernet technology
- Configurable audio channel routing
- Dual level controls
- Excellent audio quality
- 1/4-inch and 3.5 mm output jacks
- Power-over-Ethernet (PoE) powered
Specifications
Power Source:
Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts)
Network Audio Technology:
Type: Dante audio-over-Ethernet
AES67-2013 Support: yes
Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rate: 44.1, 48, 88.2 and 96 kHz
Number of Receiver (Input) Channels: 2
Dante Audio Flows: 2 receiver
Network Interface:
Type: twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s “GigE” Ethernet not supported)
Headphone Output:
Type: Dual-channel
Compatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 20 kHz, –2 dB
Distortion (THD+N): <0.002%
Dynamic Range: >100 dB
Connectors:
Headphone Output: ¼-inch and 3.5 mm 3-conductor jacks
Ethernet: Neutrik etherCON RJ45
Dimensions (Overall):
3.1 inches wide (7.9 cm)
1.6 inches high (4.0 cm)
4.0 inches deep (10.2 cm)
Mounting: intended for portable applications; contains integral belt clip
Weight: 0.5 pounds (0.2 kg)
