To place an order – Call Us!
The DXR12 is perfectly suited for front of house sound, monitors, simple amplification, rigged applications and more.
Ultra-Precise 48Bit DSP Processing for High-Definition Sound
All full range models feature Yamaha’s proprietary FIR-X tuning™ utilizing linear phase FIR* filters for the crossover network. FIR-X™ tuning simultaneously optimizes frequency and phase response while adjusting the time alignment between the HF and LF transducers. This creates a very smooth response around the crossover point, providing much better clarity and imaging than what is possible with typical crossovers. All signals are precisely processed by a 48bit (76bit accumulator) high-performance processor for high definition sound quality. All full-range models employ high-precision 24bit discrete A/D and D/A converters with superior S/N ratio and dynamic range.
Intelligent Dynamic Control for Consistent Clarity at Any Output Level
D-CONTOUR is an intelligent multi-band compressor that gives you powerful and consistent sound throughout all output levels. By constantly monitoring the output of multiple frequency bands and calculating the optimum EQ adjustments for each, even the maximum sound output maintains outstanding clarity and musicality.
Extensive DSP Protection Functions for Maximum Output
These speakers can perform to their full potential while ensuring reliable operation in even the most severe conditions. – Switchable White Front LED Each of the full-range models and DXS speakers has a white LED behind the front grille that illuminates when powered and varies in brightness depending on the amount of system limiting.
High-Efficiency 1100W Class-D Amplifiers
These high-performance amplifiers deliver the highest sound output in their class with 1100W of power, producing an impressive SPL up to 133dB.
Intelligent Onboard 3-Channel Mixer
he DXR Series features a flexible onboard mixer with a variety of input, making it ideal for simple vocal/ instrument amplification. With its flexible IN/OUT, the DXR Series can comprise a full sound reinforcement system, or seamlessly integrate into a setup utilizing DSR or DXS Series speakers. – Versatile Mic and Line Level Input Capability The DXR onboard mixer can handle up to three simultaneous inputs. It accepts both Mic and Line level input, giving you the flexibility to connect to a variety of sources from microphones to line level instruments and portable audio devices.
Superior Components. Unequaled Performance
Custom-Designed DXR Transducers All DXR Series transducers were meticulously selected and thoroughly customized to deliver ultimate performance.
Symmetrical Enclosure Design for Mirror-Mode Floor Monitoring
The DXR12 and DXR15’s enclosure design enables mirror-mode monitor placement that creates a symmetrical sound field for the performer with a larger, more defined “sweet spot”. Used in either a balanced dual-mono configuration or a stereo monitor mix setup, mirror-mode floor monitoring can enhance your performance considerably.
Dual-Angle Pole Mount Socket
The DXR’s pole mount socket offers two positions—0° and 7°—to direct the acoustic energy away from reflective surfaces and on to your audience where it belongs.
Rigging Points for Standard Eye-Bolts and Optional U-Brackets
|12″ 2-way, Bi-amp powered speaker, Bass-reflex type
|Frequency Range (-10dB)
|52Hz – 20kHz
|Diameter:12″ cone, Voice Coil:2.5″, Magnet:Ferrite
|Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite
|FIR-X tuning™ (linear phase FIR filter)
|Dynamic:1100W (LF: 950W HF: 150W) / Continuous: 700W (LF: 600W HF: 100W)
|Maximum output level (1m; on axis)
|INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1 ), LINK OUT: XLR x 1
|D-CONTOUR: FOH/MAIN, MONITOR, OFF
|100V – 240V, 50Hz/60 Hz
|Flying and mounting hardware
|Top x2, Rear x1 (Fits for M10 x 18mm eyebolts)
|35mm with 2-way features (0 or 7 degrees)
|362mm (14 2/8″)
|601mm (23 5/8″)
|350mm (13 6/8″)